PEWTER S * Pouring 270 - 315
C 0.5% Cu
This composition is a good general alloy for a wide variety of castings particularly suitable for thinner sectioned items which require greater flow, BS5140 (broad description) ABPC
PEWTER M Pouring 270 - 315
C 1% Cu
This is an excellent composition for a wide variety of castings fairly forgiving of incorrect temperature. BS5140 ABPC
PEWTER L2 * Pouring 270 - 315 C We developed this pewter to have an extended freezing range without increasing the working temperature and results in a very useful casting alloy particularly good for overcoming porosity problems, gives a very good surface finish. Slightly softer than the other compositions. This alloy contains bismuth.
PEWTER E Pouring 270 - 310
Pewter alloys are sometimes too brittle to allow the sort of bending required in some castings so this special composition has been designed to be soft and malleable figures can be bent to position whilst giving trouble free casting
XD1 * Pouring 240 - 285 C
This lead free 'whitemetal' gives excellent replication of detail with a whitemetal matt finish. The low operating temperature makes it particularly good for RTV moulds. It has a long pasty range is hard and rather brittle in thin sections. Suitable for relatively small detailed items which are not going to be bent.